***SWEPCO Oil Requires Minimum Order of $250.00***

SWEPCO 801 Clear Penetrating Lubricant is a premium quality penetrating oil and lubricant. Use it for loosening frozen and corroded bolts, nuts, screws, clamps and other threaded parts. Also good for pins and hinges and other parts that need disassembly. Just spray it on and let it go to work dissolving and loosening rust, corrosion and crud of all kinds. Super fast penetration means more work gets done with less wait time. And the clear formula means less clean-up. After disassembly and reassembly, spray parts to help prevent future rust and corrosion.

       ***For Orders Over $499.00 Please call in for accurate shipping.

SWEPCO 113 Moly Fluid Grease combines the excellent lubrication characteristics of SWEPCO’s calcium based fluid grease with the unsurpassed protection of Moly… Molybdenum Disulfide. Fluid grease users can now get the many cost-saving anti-friction benefits of Moly in a grease formulated for their unique applications. This unique grease has superior extreme pressure and anti-wear characteristics in addition to all of the performance advantages of a calcium-based grease…in severe service applications, it provides a margin of safety unsurpassed by other fluid greases. These benefits mean lower overall lubrication costs, greater load handling capability, less maintenance and fewer equipment failures. 

                               FEATURES

• Excellent all-temperature pump ability
• Superior resistance to water washout
• Moly reduces friction and heat
• Clings and penetrates to reduce wear
• Available in NLGI #000 and #00
• Perfect for 5 gangs!

       ***For Orders Over $499.00 Please call in for accurate shipping.

***SWEPCO Oil Requires Minimum Order of $250.00***

SWEPCO 308 Premium Plus Diesel Engine Oil is a high performance, multi-grade engine oil especially formulated to exceed the performance demands of 2007 and later low emission over-the-road diesel engines running on ultra-low sulfur diesel fuels. SWEPCO 308 not only meets, but exceeds, the unique service requirements of diesel engines equipped with new generation low emission systems (Tier IV), such as diesel particulate filters (DPF), exhaust gas recirculation (EGR) and diesel oxidation catalysts (DOC). 

                    Features:

• Contains DIMONYL^®
• Superior engine & filter cleanliness
• Superior oxidation resistance for longer drain service
• Added control of abrasive wear, particularly in liners and top rings
• High TBN for longer service life and better protection from corrosive gases and contaminants
• Superior film thickness and shear stability

       ***For Orders Over $499.00 Please call in for accurate shipping.

SWEPCO 210 Multi-Grade Gear Lube is a premium quality, true 80W-140, multi-purpose gear oil formulated for superior protection and more cost efficient operation of today’s demanding heavy-duty manual transmissions, final drives and power take off units. Safe, reliable, long term protection from wear, friction, oxidation, sludge, varnish and corrosion are characteristics of this versatile lubricant. These characteristics are the result of a uniquely effective blend of the very finest base oil stocks and the latest lubrication additive chemistry, including SWEPCO’s special extreme pressure/anti-oxidant LUBIUM®. 

FEATURES

• 80W-140 multi-grade
• Exceeds most manufacturers requirements
• Excellent high temperature stability
• Oxidation and thermal stability
• Excellent low temperature flow characteristics

       ***For Orders Over $499.00 Please call in for accurate shipping.

SWEPCO 212 MolyXP Multi-Grade Gear Lube SAE 75W140 With Syntheon is a high performance gear oil formulated to deliver unsurpassed, all-weather performance. Whether the application calls for protection of mobile or stationary gearboxes in hot or cold temperatures, SWEPCO’s SyntheonTM synthetic base stock blends, MolyXP advanced EP additive and proprietary Lubium® II chemistry insure extended drain protection from wear, foaming, overheating, deposits, rust and water contamination. If you want to insure maximum performance and gear box life in severe all climate service, choose SWEPCO 212 MolyXP Multi-Grade Gear Lube SAE 75W140 With Syntheon.

FEATURES 

• All-weather protection for manual transmissions, gearboxes, gear reducers, gear driven final drives, power take offs and differentials used in severe service 
• Insures full film lubrication without channeling in cold weather start up conditions down to -40°F (-40°C)
• SyntheonTM synthetic base stock blend & Lubium® II insure proper viscosity over a wide temperature range
• MolyXP plates gears to protect against friction & wear even under severe extreme pressure conditions
• Can improve fuel economy in over-the-road service
• Controls foaming; lowers operating temperatures
• Extends oil life as much as two to three times or more
• Controls deposits, varnish, corrosion, sludge, rust
• Exceeds performance requirements of all major gear box specifications and most OEMs

       ***For Orders Over $499.00 Please call in for accurate shipping.

***SWEPCO Oil Requires Minimum Order of $250.00***

Exceeds most major manufacturers' lubricant requirements for hydraulic systems, transmissions, power take-off units, final drives and wet brake systems
Reduces lubricant inventories. Simplifies maintenance. Eliminates lubrication mistakes.

SWEPCO 709 Universal Tractor Hydraulic oil formulated to satisfy the varying requirements of most major tractor manufacturers.

SWEPCO 709 Universal Tractor Hydraulic oil is also a multipurpose hydraulic oil intended for use in hydraulic systems, transmissions, power take-off units, final drive units and wet brake systems. Because of its ability to meet these many varying needs of a great number of major equipment manufacturers, SWEPCO 709 Universal Tractor Hydraulic Oil reduces lubricant inventories requirements, simplifies maintenance procedures, reduces the cost and time of maintenance and helps eliminate lubrication mistakes.

FEATURES

• Contains rust and corrosion inhibitors
• Contains anti-foam inhibitors
• Contains oxidation inhibitors
• Allison C-4 approved
• For over the road and off road equipment

       ***For Orders Over $499.00 Please call in for accurate shipping.

Use where oil or grease is not desirable - - SWEPCO 812 is a specially formulated “dry” lubricant. Its carrier agent evaporates almost instantly, leaving the remaining “dry’’ lubrication. Superior lubrication - - SWEPCO 812 is formulated with Moly, the best lubricant available. In addition, dirt and foreign particles cannot adhere to this lubricant; thus, better lubrication and less wear for surfaces exposed to such contaminants. It can be used at higher temperatures than conventional greases. And SWEPCO 812 outlasts ordinary lubricants. Won’t drip or run off - - SWEPCO 812 dry film means no waste or drippage. Saves money and time. All-purpose - - SWEPCO 812 is recommended anywhere conventional grease or oil is not desirable. For chains and sprockets, sliding surfaces, rollers and conveyors, door locks and hinges, and many other applications. 

FEATURES 

• Superior lubrication
• Will not drip or run off
• All purpose lubricant
• Use where oil or grease is not desirable

       ***For Orders Over $499.00 Please call in for accurate shipping.